Neptune DOS + DDR Combo

Neptune
SKU:
HGHG-NSDOSDDR
$479.95
(No reviews yet)
Weight:
5.00 LBS
Current Stock:
Adding to cart… The item has been added

***********Neptune DOS + DDR Combo***********

This package includes:
1x - Apex Dosing Pump
1x - Apex DDR Dosing Resirvour


The DOS is a multi-purpose Dosing and Fluid Metering System. The DOS connects to any Apex via its AquaBus connection. The true versatility and functionality of the DOS comes to life via the software wizards built into Apex Fusion. This takes dosing to a whole new level in terms of ease of use as well as functionality when compared to standalone dosing systems because the DOS is part of your Apex ecosystem. Not only can you integrate it into other operations and devices you have configured, but we also will be continuing to expand on its capabilities as time goes on via software updates to Apex Fusion.

The #1 reason people purchase a dosing system for their aquariums is for consistent and easy dosing of 2-part solutions (calcium and alkalinity) to their reef tanks. The DOS wizards in Apex Fusion take this to the next level by integrating a feedback loop from your water testing to make suggestions to fine tune the amount you dose each day. Simply put in your tank size and after a few days of entering testing results, it will help you refine your dosing amounts for the demand of your particular aquarium. No more guessing. No more fooling with the timings.

Hate doing water changes? everyone does, so they never get done as often as they should. Not only that, water changes are disruptive to the stability of your system since all of that change is happening at once.

With the DOS all you do is place your empty vessel and your fresh stock of saltwater under your stand. Then, with the Apex Fusion wizard just tell it amount of water you want to change over what length of time and the hours of the day you want it to happen and it figures it all out for you. It will perform an automatic, continuous water change for you. It gets better. If you have our dual optical water sensing accessory Apex Fusion will send you an email or text message letting you know it is time to change out the jugs. Less time pumping, siphoning, and sloshing water and more time enjoying a great aquarium.

Specifications:
* Size(Approx): 9.5" x 5" x 5"
* Weight(Approx): 4lbs
* Lift Height: 24 feet (minimum at MSL)
* Suction Height: 24 feet
* Flow Rate: Variable (0.1mL-250mL/min)
* Power Requirement: 110/120V or 240/240V
* Requires: Apex, Apex Lite or Apex Jr.


DDR
This attractive fluid containment system stores your dosing fluids in style and even tells you when it Is time to refill!
* Each side stores two liters (2L) of fluid
* Connects directly to your DOS
* Optical sensors inform your APEX when levels are low
* Strong, cast-acrylic construction
* Low-profile: will not easily tip over
**Easy to refill
* Push-fit tubing connections
* Use for 2-part (Alk/Cal), additives and other applications

Style Meets Function, Deceiving Capacity, No-tip design
The DDR has great style and will stand out in anyones equipment room. But it is not just about style. It may not look like it, but each side of the reservoir holds an ample two liters (2000 mL) of fluid. For most saltwater aquariums that are dosing Calcium and Alkalinity to their aquariums, this amount is more than enough to last at least two weeks. If you were dosing other additives it might last months before needing a refill. Speaking of refills, the DDR has easy lift off lids that make refilling it super easy.
The DDR was also designed to have a low center of gravity. This means, unlike other reservoirs on the market, it is very difficult to inadvertently tip over and ruin your day.

Optical Sensors Alert You When It is Time to Refill
The DDR is the only dosing container on the market that connects electrically to your DOS and uses optical sensors that alert you when your fluid has approximately 20% remaining. This alert could be used to send you a text or an email, or even trigger other events on your Apex. Also, when detecting water level, optical sensors are far less likely to fail than their float switch counterparts.

Connects Directly to your DOS
One simple connection links the DDR to the DOS. No worries about fooling around with loose wires, float switches, etc. Just plug it in and it will show up in your Apex Fusion Dashboard.

Ready for Apex Fusion
Although not required, the DDR interfaces directly into your Apex Fusion dashboard. See in realtime your fluid levels and get an alarm when a reservoir runs low.

Specifications:
Size (Approx.): 10.5″ x 8.5″ x 5.5″
Fluid Capacity (Approx.): 2000ml per side
Weight (Approx.): 2 pounds
Requires: Apex, Apex Lite, or Apex Jr. and DOS to operate sensors
Package includes: DDR, 4m of DOS tubing