Sicce Voyager 3 Pump 1200 GPH

********Sicce Voyager 3 Pump 1200 GPH********

* Highly-adjustable Italian-made aquarium water circulation pump
* Enhanced directional range optimizes aquarium water movement
* Manually adjust pump face plate to create 5 different flow patterns SICCE

Greater range of motion AND adjustable flow patterns ensure optimal aquarium water movement. Sicce Voyager Stream Pump Models 2, 3, & 4 boast amazing Italian-made ingenuity to truly eliminate low-flow “dead spots” and to ensure custom water movement that suits your aquarium inhabitant’s needs. Great for marine aquariums, reef aquariums, and freshwater aquariums use. CE & UL listed. 3-year manufacturer warranty.

Sicce Voyager Stream Pump Models 2, 3, & 4 features a distinct magnet mount system that allows enhanced placement possibilities as well as enhanced directional range. Dual pivot-point design allows 180-degree movement on the vertical axis and a full 360-degree circular motion at the base for endless orientation possibilities. You can even mount the unit on the rear glass pane and direct water flow across the length of the aquarium without sacrificing its directional range!

Sicce Voyager Stream Pump Models 2, 3, & 4 features an adjustable faceplate that lets you manually select from five different flow patterns. Choose a wide or narrow flow to faithfully recreate marine currents and satisfy the water movement needs of even the most particular coral. Unique bidirectional rotor design ensures reliable wear-resistant performance that starts in the correct direction preventing premature damage or annoying noises. Magnet mount system suitable for aquarium glass up to 3/4″ thick.

Maintenance
For the periodic maintenance of the pump, first of all unplug the plug from the electric socket and then take the pump out of water. Clean regularly the pump and the rotor. In case of very dirty or limestone or with a lot of detritus water, it is recommended a more frequent cleaning.

Proceed in the following way: Detach the pre-chamber from the pump and take out the rotor. Clean all the parts: the pre-chamber, the rotor, the impeller and their sits. Do not remove the dirt by hard means but using a soft brush with soap or vinegar. If, after that, the impeller makes too much noise, substitute it with a new one because it means that it worn out. Then assemble everything in the inverse order.