New Koralia Nano Flow Pump 240Product Code: HY00715
We currently have 999 in stock.
* Compact water circulation pumps ideal for nano aquariums
* Nano pumps boast small foot print and higher flow rate
* Energy-efficient pumps operate on just three and half watts Hydor
Enjoy greater flow rate with the NEW Koralia Nano 565 Pump! Submersible water pumps generate a wide and gentle water flow to breathe life to once, hard-to-access "dead spots" in your aquarium. Hydor Koralia Nano Pumps boast extremely low energy consumption of just 3.5 watts and are suitable to mount onto aquarium glass up to 3/8" thick. Ideal for saltwater nano reef aquariums.
* Unwind the electric cable.
* Insert the cylinder on the sphere attachment to the pump in the proper slot.
* Immerse the pump completely and turn it in a vertical position in order to allow any air to come out of the impeller chamber.
* Attach the pump with the internal part of the suction cup and magnet support to the aquarium side. Be sure to clean the surface before attaching the support.
* Adjust flow direction as desired.
* Connect to electrical supply.
* Regular cleaning and maintenance will guarantee the pump better and longer performance.
* With one hand, hold the pump assembly. Use your other hand to remove the external magnet.
* Disassemble the unit.
* Clean the impeller assembly, the chamber and the bearings removing deposits with a soft brush. Do not use detergents or solvents.
* If necessary, clean the grid of the lower and upper chamber by putting it under running tap water or using a soft brush to remove algae and other residue.
* Reassemble everything in reverse order. Make sure the notches on the pump chamber correspond and that the shaft is placed correctly.
* In case of abnormal noise and reduced performance caused by sudden changes in electricity supply, restart the pump.
The combination suction cup and magnet can safely hold Koralia Nano pumps positioned in aquariums with glass (or acrylic) up to 3/8" thick.
* Length: (inside aquarium) 3-1/4"
* Total Length: (including external magnet mount base) 3-3/4"
* Width: 2"
* Height: 2"