Turbelle nanostream 6055

(No reviews yet) Write a Review

About This Product

Turbelle nanostream 6055

for aquariums from 40 to 500 litres (11 to 132 USgal.).
Flow rate: 1,000 to 5,500 l/h (264 to 1,453 USgal./h).
Energy consumption: 4 - 18 W.
Voltage / frequency: 100 - 240 V / 50 - 60 Hz.
Cable length: 5 m (196.8 in.).
Dimensions: diam. 70 mm (2.7 in.), output: diam. 40/15 mm (1.5 / .59 in.).

Turbelle nanostream electronic

Turbelle nanostream 6055 is an electronic speed controlled pump operating on safety extra-low voltage. It is ideal for use in every aquarium with a volume of 40 to 500 litres (10.5 to 132 USgal.) permitting washing of waves or simulating tidal currents. It contains a new microprocessor-controlled motor and thus can be called an intelligent pump:
The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about 30 per cent lower than in conventional pump motors.
The pump will be stopped immediately in case of blockage. After the blockage has been removed, the pump will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill.
All pumps with an electronic motor can be controlled by Multicontroller 7094 and 7095 as well as by Singlecontroller 7091.
As a standard feature, Turbelle nanostream is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane.

Propeller Technology

Titanium Alloy Shaft

Low motor heat

3D adjustment

Magnet Holder for glass panes
up to 19 mm (.74 in.) .

Safety extra-low voltage.

Controllable speed, wave simulation, tidal currents.