**Two Little Fishies PhoBan Reactor 150**
The PhosBan Reactor 150 is designed to push water upwards from the bottom and through the media. This forces an even distribution of water throughout the media and prevents channeling from occurring. The PhosBan 150 can be mounted under the aquarium or hung on the back of the aquarium. It comes with barb hose fittings for 1/2" tubing and a 1/2" barbed ball valve included for flow control. The Phosban 150 is compatible
The Phosban 150 is compatible with any pump that uses 1/2" tubing and a flow rate between 100 and 250gph.Features The PhosBan Reactor 150 is designed with the upflow principle to achieve the most efficient use of PhosBan or other chemical filter media. By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media, and prevents channeling. It can be mounted hanging on the back of the aquarium or below the aquarium. Hose barb connections are for 1/2 inch i.d. tubing. Includes 1/2 inch barbed ball valve for flow control, and hose clamps. Use with any pump having a capacity between 100 and 250 gph, but regulate the flow rate to the recommended 20 to 30 gallons per hour with the included ball valve.
Max Media Capacity - 200 grams
Inlet Tube - 1/2"
Outlet Tube - 1/2"
Max Flow Rate - 250 gph
Dimensions - 14.25" H x 3.0" W x 4.0" L
Distance required behind tank for HOB application - 4.0" min
Phosban 150 body
Phosban 150 Lid
Media, Tubing, and pump sold separately.